We all know that there are various alloying elements in aluminum alloy materials, so when the alloying element content is too much on 5052 aluminum plate, the next 5052 aluminum plate manufacturers to detail.

5052 aluminum plate material, iron content is significantly greater than 0.25% can not get the normal color, iron content of the increase, glossiness and decline.Iron content also affects the uniformity and continuity of oxidized coloring and the effect of coloring treatment.

A small amount of copper is beneficial to the mechanical properties and appearance brightness of aluminum plate 5052, but does not reduce the corrosion resistance.But more copper content can be oxidized film black.

A small amount of manganese can reduce embossing.However, when the content of manganese is high, the oxide film is yellow and the effect of color treatment is worse.

When the zinc content is high, the grain structure is coarse, the mold design loss is also large, the oxide film is opaque, and leads to the occurrence of shiny pear skin spots.

When the content of titanium is obviously greater than 0.1%, the color of 5052 aluminum plate is affected. Therefore, the content of iron should be controlled below 0.25%, and the content of other impurity elements should be less than 0.1%.

The above is about the influence of too much alloy element content on 5052 aluminum plate, friends who want to know the price of 5052 aluminum plate can call us.