6061 aluminum plate is commonly used in the production of machinery and equipment, and does it need to be heat treated after machining?Next, 6061 aluminum plate manufacturers to give you a brief explanation.

As we all know, 6061 aluminum plate is an aluminum alloy material that needs to be obtained through heat treatment. Although the strength and hardness can not be compared with 2 series and 7 series aluminum plate, its strength and hardness can also meet the needs of machinery and equipment.

Generally speaking, heat treatment is still needed after processing of 6061 aluminum plate. There are mainly the following methods:

Fast annealing: with the difference of the effective thickness of the material, the heating temperature should be controlled at 350 ~ 410℃, and the holding time between 30 ~ 120min;Air or water cooling.

High temperature annealing: when the thickness of 6061 aluminum plate is greater than or equal to 6mm, the heating temperature is 350 ~ 500℃, the holding time is 10 ~ 30min, less than 6mm, the heat through so far;The cold air.

Low temperature annealing: at this time the heating temperature requirements are not so high, between 150 ~ 250℃;But the insulation time should be relatively long, about 2 ~ 3h;Air or water cooling.

6061 aluminum plate has better processing performance. After heat treatment, its strength and hardness are improved, and it is not easy to deform after processing, which is widely loved by customers.

6061 aluminum plate machine processing after the need for heat treatment of the relevant introduction here, want to buy 6061 aluminum plate customers can contact us.